Catalog :: Television & Video :: Projectors :: Optoma X600 XGA 6000 Lumen Full 3D DLP Network Projector with HDMI

This fits your .

Make sure this fits by entering your model number. 6000 lumens bright output makes it ideal for large screen applications Display Port and HDMI ports for full digital connectivity, full 3D compatibility. Studies show information is more easily retained when material is presented in 3D Over the network management and control capability makes it the perfect projector for large installations The X600 has energy saving features including <0.5W standby mode and auto power off Full support for Crestron Room view, Telnet, Extron IP Link, AMX dynamic device discovery and PJ-Link protocols, allow almost all aspects of the X600 to be controlled across network puter. Compatibility- 3D Compatibility- Side-by-Side: 1080i50 / 60, 720p50 / 60, Frame-pack: 1080p24, 720p50 / 60, Over-Under: 1080p24, 720p50 / 60. Computer Compatibility- WUXGA, HD, UXGA, WXGA, SXGA+, SXGA, XGA, SVGA, VGA Resized, VESA, PC and Macintosh Compatible. Horizontal Scan Rate- 15.375 – 91.146 KHz. Video Compatiblity- NTSC, PAL, SECAM, SDTV (480i), EDTV (480p), HDTV (720p, 1080i/p) Throw Ratio : 1.8 - 2.1:1

4.6

Reviews: 20

5 stars

75%

4 stars

20%

3 stars

0%

2 stars

0%

1 star

5%

billyboy

06/25/2019

4

Loved it. Original lamp lasted 2800 hours. Bought a replacement lamp $138.00. Installed the new lamp. there is a little rubber button on the lower left side looking at the projector, peel it off with finger nail. Phillips head screw. The lamp screws are on the top of the lamp holder. Lift the lamp. Install the new one. Tighten screws. Reinstall the rubber button.

buddy

06/25/2019

4

This is a great projector for large rooms where we need a very bright display. We are using this for our church service at a middle school auditorium. I have only one complaint. The VGA output only reflects the VGA1 input. The output is used to feed a monitor so anyone on stage can see what is on the display behind them. And having a single VGA input works most of the time. However if someone wants to bring their own PC while they are on stage then we connect into the second vga input. That will not display on the vga output. If the HDMI 1 input is used there is no VGA output signal. It had been my home that I could do that. This was a feature I thought we bought. Outside of that its great.

Bor Regas

06/25/2019

4

Bought this for our school gymnasium. Needed a very bright picture to punch through the bright gym-style lighting and it looks great! I went 4 stars because there is no "Freeze" button, or at least I cant find it. Its a small thing but most projectors Ive used have it. It allows you to freeze an image at the projector and then move about on your laptop without it being displayed. Once you have the next part ready to go, you hit the freeze button and it goes live again.

Dr. Joshua J

06/25/2019

4

great projector. Crystal clear, but with a smaller projection than my last one. I lost about 8 inches of screen.

Optoma X600 XGA 6000 Lumen Full 3D DLP Network Projector with HDMI

Black Friday Ad details.