Mackie SRM210 V-Class 2,000W 10" Powered Speaker 10 in.

The Mackie SRM210 V-Class 2,000W 10” powered speaker is the smallest in the line-up, but doesn’t compromise on any of the high-performance V-Class features. The SRM210 is equipped with exactly the same power section and technical advances as the larger Mackie V-Class speaker models. And despite its more compact size, it offers exceptional low-frequency response, going down to 45Hz, with an impressive maximum sound pressure level of 131 dB, all while being the most easy to carry. Advanced Impulse DSP module The goal of Mackie’s Advanced Impulse DSP is to remove all the anomalies that loudspeakers and horns contribute to a signal, from “honkiness” or “squelch” to "mushy" low end, effectively making the drivers "invisible" and output nothing but clean sound. By more intelligently (and more thoroughly) employing the benefits of FIR filtering, Advanced Impulse DSP eliminates undesired acoustic anomalies across the entire dispersion zone (horizontal and vertical), as well as frequency range and time domain. SYM-X horn The custom horn within each SRM | V-Class speaker was designed with the goal to bring out the very best from the HF transducer, while maintaining the flattest response possible at the crossover point. The special design of this horn allows the polymer compression driver to operate at near maximum efficiency. This means it gets louder and sounds better with less effort. The transition between the LF and HF is a symmetrical, flat response, which is what helps make the smooth midrange in V-Class speakers possible. Transparent system protection Other loudspeakers feature some sort of protection and limiting to help them squeeze a dB or two out of the speaker. This is almost always at the expense of sound quality and is commonly experienced as diminished bass response and the "pumping" sound of the internal limiter having a bad day. V-Class is all about reliable performance without sacrificing sound quality, even when pushed to the max. Packed with cutting-edge amplifier protection that not only keeps the electronics and transducers safe from any harm, it does so with a dramatically less effect on the tonal balance and sound quality. When operating at very high levels, the processor-controlled system monitoring analyzes the audio signal and identifies the problem areas, then dynamically applies multi-band compression to those specific frequencies rather than lowering the overall output. This keeps levels where want them and maintains the sound quality expect. Wireless control and streaming With the SRM Connect app available for iOS and Android devices, get complete control over everything and then some for up to 2 speakers simultaneously. Quickly access levels, EQ, meters, and configuration. Plus, can save memory presets to streamline setup at next gig. When link to another SRM | V-Class speaker, get control over the entire system in the app, all in one view. No additional pairing or swapping back and forth on device is required. For a simple music playback system, can stream music directly from any Bluetooth enabled device.