M. Patten
I sent it back. I bought this to match a Dell P2714HC display that I already had. The first thing I noticed was that it could not be mounted with a VESA mount. This only uses the stand that came with it. That stand is not as good as the one on the older display, it does not go up and down, only can rotate a bit. It also lacks a DVI interface, so you have to buy an adapter to go from HDMI or VGA to DVI. I took those things in stride, disappointing, but not a deal breaker. Then I powered it up and connected it to the computer. The older display is active all the way to the Bezel, but this one is not. There is a black band about an inch wide all around the display, making the actual active display area closer to a 24” monitor. So the two do not match at all. That was my deal breaker. At first I thought it might be configured wrong, but the pixel count was correct, and there was no option I could see to shrink the active display area. (And why would you?) I eventually found a refurbished P2714HC on eBay and ordered it so my displays will match perfectly.