Richard S. James Jr.
Ive been using this TT600 for about a week now and am pleased with how the controls work and how it works with my Canon EOS 7D. However, I wish it were built to be more durable. I had a tabletop setup in our living room, which has thick, padded carpet. the table is 27.5" tall. I had the mounting stand attached to the TT600 so it could sit on the table behind a diffuser panel. I also had the wide panel on the flash deployed. Well, I managed to tip it off the table and it landed with a soft thud. The light seemed fine and continued to flash on command, no issues. However, when putting everything away, I saw that the wide panel had broken off the light. As it turns out, it has tiny plastic nubs on each side which act as the hinges for the panel so you can rotate it into and out of position. Well, one of those tiny nubs broke. So now the panel cannot be reattached, which also makes using the catchlight very difficult, if not impossible. The flash will still work, but these features are lost to me unfortunately. As the wide panel was lying flat against the face of the flash when the unit fell, I thought it should withstand that better than it did. And seeing the tiny bit of plastic that is all that holds it together was also disappointing.