Radial Engineering Catapult Mini TX 4-Channel Cat 5 Audio Snake

The Catapult Mini RX and TX act like a typical four-channel analog audio snake; they allow to send mic or line-level signals from one location to another without signal loss, noise, or interference, and without any digital audio conversion needed. What makes the Catapult system unique is that it utilizes Cat 5 Ethernet cable, which is widely available, lightweight, and economical. Simply connect a shielded Cat 5 cable between any two Catapult modules and they will use the analog conductors in the cable to deliver four balanced audio lines to any destination. Straight-wire passive operationCatapult modules require no power to operate, and since they keep the signal in the analog realm, no digital conversion is necessary. Straight-wire connection from the XLRs to the RJ45 connector on a Cat 5 cable ensures that audio passes through without coloration or distortion.Utilize pre-existing cable installationsAs many buildings are already pre-wired for Cat 5, can take advantage of this to transmit audio between distant rooms without the need to install or supply new cabling. This eliminates the need for bulky and expensive multi-channel audio cable, and allows contractors to benefit from installed network cable and easily connect from one room to another.Mix & MatchAll of the Radial Catapult modules are compatible with each other, and each is sold individually, so can select whichever combination best suits needs. The Catapult Mini RX and TX can be used together as a pair, creating a compact 4-channel audio snake. However, if prefer to have a stage box to plug microphones into, but want a compact breakout cable that fits in the case with the mixer, combine the Catapult TX4 with the Catapult Mini RX. A variety of modules allow to customize transmit and receive devices to complement any application.